View MCH6103_350393.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6611
PNP/NPN Epitaxial Planar Silicon Transistors
MCH6103/MCH6203
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers and strobes.
Package Dimensions
unit:mm 2177
[MCH6103/MCH6203]
0.25
Features
* Adoption of MBIT processes. * Large current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). * High allowable power dissipation.
0.3 6 5 4
0.15
1.6
1 2.0
0.25
23 0.65
2.1
( ) : MCH6103 Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2x0.8mm)
Conditions
0.15
Specifications
1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector SANYO : MCPH6
0.85
Ratings (-50)80 (-50)80 (-)50 (-)5 (-)1.0 (-)3 200 1.0 150 -55 to +150
Unit V V V V A A mA W C
C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)100mA VCE=(-)10V, IC=(-)300mA VCB=(-)10V, f=1MHz 200 420 (9)6 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz pF Unit A A
Marking : MCH6103 : AC, MCH6203 : CC
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N2000TS (KOTO) TA-2974 No.6611-1/5
MCH6103/MCH6203
Continued from preceding page.
Parameter Symbol Conditions IC=(-)500mA, IB=(-)10mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(-)300mA, IB=(-)6mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage VBE(sat) IC=(-)500mA, IB=(-)10mA (-50) 80 (-50) 80 (-)50 (-)5 (36)38 (173) 332 (28)40 Ratings min typ (-280) 130 (-145) 90 (-)0.81 max (-430) 190 (-220) 135 (-)1.2 Unit mV mV mV mV V V V V V V V ns ns ns ns
V(BR)CBO IC=(-)10A, IE=0 V(BR)CES IC=(-)100A, RBE=0
Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time
V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)10A, IC=0 ton tstg tf See specified test circuit. See specified test circuit. See specified test circuit.
Switching Time Test Circuit
PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 + 100F VBE= --5V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. + 470F VCC=25V RB
RL 50
--1.0
IC -- VCE
MCH6103
0 --4 mA
--3 0mA mA --20
1.0
IC -- VCE
MCH6203
10mA
Collector Current, IC - A
Collector Current, IC - A
--0.8
--8m
--0.6
A
A --6m
A --10m
--4mA
0.8
30mA 40mA
20mA
8mA 6mA 4mA
0.6
--0.4
--2mA
--1mA
2mA
0.4
1mA
0.2
--0.2
0 0 --200 --400 --600 --800
IB=0
--1000 IT01890
0 0
IB=0
200 400 600 800 1000 IT01891
Collector-to-Emitter Voltage, VCE - mV
--1.0 --0.9
Collector-to-Emitter Voltage, VCE - mV
1.0 0.9 0.8
IC -- VBE
MCH6103 VCE= --2V
IC -- VBE
MCH6203 VCE=2V
Collector Current, IC - A
--0.8
Collector Current, IC - A
--0.7 --0.6 --0.5
0.7 0.6 0.5
Ta=75 C
25C --25C
C Ta=75
0 0.2 0.4 0.6
--0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4
0.4 0.3 0.2 0.1 0
25C
--0.6
--0.8
--1.0 IT01892
--25C
0.8
1.0 IT01893
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
No.6611-2/5
MCH6103/MCH6203
1000 7 5
hFE -- IC
Ta=75C
25C
MCH6103 VCE= --2V
1000 7 5
hFE -- IC
Ta=75C
--25C 25C MCH6203 VCE=2V
DC Current Gain, hFE
2
DC Current Gain, hFE
2 3 5 7
3
--25C
3 2
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5
7 --0.1
Collector Current, IC - A
--1000
--1.0 IT01894
10 0.01
2
3
5
7
Collector Current, IC - A
0.1
2
3
5
7 1.0 IT01895
VCE(sat) -- IC
MCH6103 IC / IB=20
1000
VCE(sat) -- IC
MCH6203 IC / IB=20
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
7 5 3 2
7 5 3 2
--100 7 5 3 2
100 7 5 3 2
7 Ta=
5C
C --25
25C
7 Ta=
5C
5C --2
25C
--10 --0.01 2 3 5 7
Collector Current, IC - A
--0.1
2
3
5
--1.0 IT01896
7
10 0.01
2
3
5
7
0.1
2
3
5
Collector Current, IC - A
10000 7 5 3 2 1000 7 5 3 2 100 7 5 3 2 10 0.01 2 3 5 7 2 3 5
7 1.0 IT01897
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
3 2 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7
5C Ta=7 C --25
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
--10000 7 5
VCE(sat) -- IC
MCH6103 IC / IB=50
VCE(sat) -- IC
MCH6203 IC / IB=50
25C
5C Ta=7 C --25
25C
Collector Current, IC - A
--10000 7
--1.0 IT01898
0.1
Collector Current, IC - A
10000
7 1.0 IT01899
VBE(sat) -- IC
MCH6103 IC / IB=50
VBE(sat) -- IC
MCH6203 IC / IB=50
7
Base-to-Emitter Saturation Voltage, VBE (sat) - mV
5 3 2
Base-to-Emitter Saturation Voltage, VBE (sat) - mV
5 3 2
--1000 7 5 3 2
Ta= --25C
75C
1000 7 5 3 2
Ta= --25C
25C
75C
25C
--100 --0.01
2
3
5
7
Collector Current, IC - A
--0.1
2
3
5
--1.0 IT01900
7
100 0.01
2
3
5
7
Collector Current, IC - A
0.1
2
3
5
7 1.0 IT01901
No.6611-3/5
MCH6103/MCH6203
5 3
Cob -- VCB
MCH6103 f=1MHz Output Capacitance, Cob - pF
5 3 2 100 7 5 3 2 10 7 5 3
Cob -- VCB
MCH6203 f=1MHz
Output Capacitance, Cob - pF
2 100 7 5 3 2 10 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5
Collector-to-Base Voltage, VCB - V
2 0.1
2
3
5
7 1.0
2
3
5
7 10
2
3
5
IT01902 1000
Collector-to-Base Voltage, VCB - V
IT01903
1000
f T -- IC
MCH6103 VCE= --10V
f T -- IC
MCH6203 VCE=10V
Gain-Bandwidth Product, f T - MHz
7 5
Gain-Bandwidth Product, f T - MHz
7 5
3
3
2
2
100 --0.01 2 3 5 7 --0.1 2 3 5
Collector Current, IC - A
--1.0 IT01904
7
100 0.01
2
3
5
7
0.1
2
3
5
Collector Current, IC - A
1.4
7 1.0 IT01905
ASO
5 3 2
PC -- Ta
MCH6103 / MCH6203
ICP=3A IC=1A
1.0 7 5 3 2 0.1 7 5 3 2
Collector Dissipation, PC - W
Collector Current, IC - A
MCH6103 / MCH6203 50 0 s 10 ms 10 0m s 1ms DC op er ati on
10 s 0
1.2
1.0
M
ou
nte
0.8
do
na
ce
ram
0.6
ic
bo
ard
(6
0.4
00
Ta=25C Single pulse For PNP, minus sign is omitted.
Mounted on a ceramic
2 3 5 7 1.0 2 3
mm
2
x0
0.2
.8m
m)
140 160
0.01 0.1
board(600mm2
x0.8mm)
2 3 5 7 100 IT01906
0 0 20
5 7 10
Collector-to-Emitter Voltage, VCE - V
Ambient Temperature, Ta - C
40
60
80
100
120
IT01907
No.6611-4/5
MCH6103/MCH6203
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of November, 2000. Specifications and information herein are subject to change without notice.
PS No.6611-5/5

▲Up To Search▲

Price & Availability of MCH6103

	To Download MCH6103 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .